C146 10H000 000 15

heavy|mate® F Brief information Approvals, Testhouse Characteristics Approval-Number UL in preparation in preparation CSA in preparation in preparation 75 heavy|mate® F General information General information • Modules inserts without crimp contacts, crimping tools see separate catalogue “Tools”. • Contacts must be ordered separatly, processing instructions see catalogue “Tools”. • Connectors series heavy|mate® F may be engaged or disengaged when live but without electrical load. If these connectors are mated or unmated under load, the load shall be reduced to 10 % of rated current. • We recommend using the high profile housings / hoods for the heavy|mate® F inserts. • Empty modul spaces have to be filled with blind modules. • Torque for PE connection 1.2 Nm Advantages of the system • No standard but interchangeable with competitive products. • Housings are designed according to DIN EN 175 301 801 • Simply connecting of the modules and frames. First-to-mate last-to-break protective ground contact Range of housings Size E6 Size E10 Size E24 Size E48 76 Size E16 heavy|mate® F How to select a solution with series heavy|mate® F? Requirements • 3 x 400V; 50A; 6mm² wire gauge • 8 x 250V; 8A; 1.5mm² wire gauge • 5 x 400V; 15A; 4mm² wire gauge Solution 1. Check how 16 contacts can be realized; see modules overview on page 78 Possible selection: a) 1 x 17 contacts b) 2 x 12 contacts c) 1 x 6 contacts + 1 x 12 contacts d) 1 x 3 contacts + 1 x 6 contacts + 1 x 12 contacts 2. Check technical parameters / solution, see detail pages of the modules from page 82 Possible selection: a) not possible due to voltage b) not possible due to voltage c) not possible due to current d) POSSIBLE 3. Choose matching contact, see detail page of the modules on page 82 Possible selection: a) 3 contacts = C146 10A003 500 15 → contacts = VN01 040 0013 1C b) 6 contacts = C146 10A006 500 15 → contacts = VN01 025 0039 1C c) 12 contacts = C146 10A012 500 15 → contacts = VN01 016 0027 1C 4. Choose matching frame, see frames on page 80 Solution: C146 10P10 000 15 5. Choose matching housing, see housings on page 162 Solution: C146 21R010 600 8 Schematic construction 77